NDLI: Computer design of AC and DC inductors

Please wait, while we are loading the content...

Proceedings:Electrical Electronics Insulation Conference and Electrical Manufacturing & Coil Winding Conference

Proceedings of Electrical/Electronics Insulation Conference

Proceedings of Electrical/Electronics Insulation Conference

The effect of electrical ageing on a cast epoxy insulation

Dynamic mechanical behaviours of epoxy insulating composites

Monitoring of electrical properties of particulate filled epoxy resins under corrosive stress

Recent progress in computer simulation applied in the automatic pressure gelation (APG) process for epoxy casting systems

Vacuum sand-casting system for electric and electronic parts

Current technology in stator lacing

New trends in stator testing

Increasing the efficiency of induction motors

Noise problems of appliance drain pumps

PA46 NYLON The driving material for E-motors

Transformer design using Windows

Multi-tasking using magnetic design analysis software

Trickle impregnated coils using solvent free, single part epoxy

Low pressure encapsulation of coils, transformers and electronic assemblies with thermosetting liquid molding compound

Techniques and thermoplastics for encapsulating high performance coils

Tools for commutator turning

Consideration about the influence of different process parameters during vacuum casting

Comparative Tracking Index of PSA insulation for electical equipment component design according to UL 1950

Motor repair industry response to the energy policy act of 1992: A status report

One multi-location network's approach to environmental stewardship in the 1990s

Practical approaches to ISO 9000 for the small-to-midsized company

Rebuilding steel core (cap and cone) commutators

Rotating electrical equipment maintenance and repair

NEMA magnet wire technical committee

The new MW 1000 standard

International winding wire standards: A standards report

Evaluation of a carbonized foam electrode for DC high voltage continuity testing of magnet wire

A new mathematical modeling approach to NEMA magnet wire dimensional standards for fine sizes

Nonpolluting solid lubrication of enamelled wires

The relative solvency and viscosity effects of cresylic acid isomers on high solids wire enamel

Development and application of new self-bonding magnet wires with self-lubricating properties

Development of laser strippable new heat resistant magnet wire

Overview of our heritage [dielectric materials]

Evaluation of impregnants designed for all-film power capacitors engineering: Electric conduction and breakdown

Thermal aging effects on the electrical properties of film and ceramic capacitors

Permanent magnets in review

Efficient magnet charging and conditioning

Effective magnetic measurements

The hysteresisgraph as a quality control tool

Permanent magnet motor magnetizing and calibrating

Multi-pole magnetization of high resolution magnetic encoder

Toroidal coil winding machines making the best choice

Precision wire stripping

Miniature coil winding provides reliability and longevity to disk drive components

Self-supporting coils choosing the best procedures

Mounting and packaging techniques for toroidal devices

Metallurgical aspects in high volume copper bonding

New designs aid engineering thermoplastics for small motor assemblies

Epoxy bonding of magnets for permanent magnet motors

Commutation turning: The tool is only the tip of the solution

Advanced methods of motor testing

New UL classification for silicone transformer fluid

High temperature operating capabilities of silicone transformer fluid

Load break switching in silicone transformer fluid

Corrosive and non-corrosive sulfur in transformer oils

A new cable for advanced power transformer windings

Inorganic bonded mica paper for commutator and high-temperature applications

New high voltage insulation with increased thermal conductivity

Improved mica groundwall insulation via grafted polymers

Preliminary evaluation of motor insulation for variable speed applications

An improved sleeving insulation for use on VPI form-wound coils

Electric field enhancement studies on stator windings with defect sites using finite-element computation

Comparison of 9 Mil, 11 Mil and 14 Mil ferro-resonant transformer design

Trends of power applications New ferrite materials and optimized core shapes

Frequency characteristics of ferrite core inductors

Alnico permanent magnets an overview

World class manufacturing

High quality, low cost assembly using the injected metal assembly process

Thermal effects on the torque-speed performance of a brushless DC motor

Robotic visual servoing in a flexible manufacturing workcell

Electrostatic fluidized bed System innovations and powder advancements

Customer's voice in commutator engineering

Reducing motor costs through chemistry

Fundamental process and test considerations in room cure trickle

"Heatless-cure" coating of electrical windings

Origins of high voltage continuity failures in enamel coated copper magnet wire

Frequency characteristic of magnet wires

Moisture resistance of thin film electrical insulation A comparison of test methods

SPC for magnet wire

Responding to the CFC challenge

Resistance of electrical insulating varnish to environmentally friendly refrigerants

Polyester insulation materials, HFC refrigerants and ester lubricants

Compatibility of nonmetallic motor components with R22 and R502 replacement refrigerants

Compatibility of alternative refrigerants with varnished magnet wire

Comparison of mechanical strengths of three materials used as pressure plates in oil-filled transformers

Advantages of corrugated transformer insulation

Development of new insulation system for use in oil-filled transformers

Sensitivity of identified transfer functions in transformer diagnosis

Automated digital winding test analysis methods

Comparative performance of woven glass and polyester film backed micaceous tapes for the insulation of high voltage AC stator windings of rotating electrical machines

Verification of insulation temperature class through weight loss measurements

Voltage endurance test facility for electric generator stator coils

Experience gained performing thermal cycling tests

Repeated failures and water treeing in polyethylene HV cables

The mechanism and behaviour of water treeing in polymeric materials

Morphology and chemical composition of water trees in mineral-filled EPR insulation

A systematic approach to process control in commutator fusing

Commutator fusing and brazing miniature motors to starter motors

An overview of commutator fusing technologies

Efficient fusing using AC or DC current

Verifying armature fusing quality

Advantages and applications for two station balancing machines

Establishing balance tolerances for armatures

Process and product considerations of armatures by metal removal

Standardization of balancing methodolgy in motor manufacturing

Precision ovens for thermal endurance evaluation of electrical insulating material

Evaluation of electrical material properties: Embedment stress testing on electrical encapsulation resins

An optical technique to detect the degradation of electrical insulation

Polymer concrete high voltage insulation: A versatile material for the 90's and beyond

Evaluation of surface degradation of polymer insulating materials related to leakage current

Advantages of high voltage DC dielectric tests compared with AC tests

New technology for partial discharge testing of operating generators and motors

On-line monitoring of partial discharge in rotating machine windings and auxiliaries including the use of external sensors

In-service monitoring of thermal generator stator insulation condition

Advanced methods for continuous insulation condition monitoring on hydrogenerators

Moisture cross-linkable insulation compounds with flame retardant properties

The effect of interfacial interaction on charge storage in clay filled LDPE

Study on life estimation of cable insulation by gas evolution and oxygen consumption during radiation and thermal aging

Computer design of AC and DC inductors

Transformer design for low cost battery chargers

Shielding and magnetic field reduction for small and medium size transformers and reactors

Coil bobbin and encapsulated coil plastics for the 1990's

Introduction and overview of statistical process control

Applying machine vision in electrical component manufacturing

Cause and effect analysis: "Power tool" for total quality

[1991] Proceedings of the 20th Electrical Electronics Insulation Conference

Proceedings of the 19th Electrical Electronics Insulation Conference,

Computer design of AC and DC inductors

Content Provider	IEEE Xplore Digital Library
Author	Hubert, J. Kakalec, R.
Copyright Year	1993
Description	Author affiliation: Berkeley Heights, NJ, USA (Hubert, J.)
Abstract	The design of AC and DC inductors is discussed. There are three types of inductor designs covered, i.e., those with only AC voltage applied; those with a small AC voltage and a large superimposed DC current; and those with significant AC voltage and DC current. While the same fundamental theory applies for all designs, each design approach is considered separately. The design procedure for each type of inductor is developed with the intention of being implemented on a digital computer. A systematic approach easily implemented in a computer program for the design inductors is discussed.
Starting Page	707
Ending Page	712
File Size	455532
Page Count	6
File Format	PDF
ISBN	0780308476
ISSN	10716270
DOI	10.1109/EEIC.1993.631314
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	1993-10-04
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Inductors Voltage Permeability Iron Inductance Magnetic flux Magnetic cores Saturation magnetization Equations Magnetic materials
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in